Keg Dispensing Supplies

Lock that shank on tight! A lock nut for a beer shank comes standard with most shanks. It goes on the backside of the front flange and tightens against the wall of the kegerator surface to create a sturdy connection. A must have if your shank has no existing lock nut!

This product is designed to cool a beer tower on a direct draw type draft beer system. The number one complaint about any direct draw kegerator is that the beer faucet & shank get warm and your first 1/2 glass of beer is always foamy. But the solution is less than 5 minutes away - just install this tower cooler. It works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is that the continuous cold keeps faucet mold and bacteria growth at an absolute minimum. Installs in minutes with no tools!

You can never have too many disconnects! For all your ball lock draft needs, Great Fermentations offers you these liquid ball lock disconnects. Easy to take apart and clean, these have their uses not only in picnic taps, jockey boxes and home draft systems, but in a number of other brewing-related projects. These disconnects have a 1/4" MFL connection, which is perfect for attaching a swivel nut set for myriad applications. They have a plastic end on the male flare fitting so you don't have to use a plastic flare fitting washer when connecting them to metal. Make sure you have enough on hand for all the kegging and draft projects your mind can come up with!

This is a replacement plunger shaft assembly for standard faucets. It joins with the faucet lever and moves back and forth to allow beer to flow from the faucet. If you need a replacement for an old standard faucet, Great Fermentations has one for you!

This isn't just your ordinary probe washer! This is the one designed specifically for the American Perlick Sanke coupler. It is the washer for the probe on these couplers made by Perlick, a name long recognized for quality in the draft beer world. If yours goes missing or is damaged, get another one here and keep the beer flowing!

The faucet knob is the handle part of your faucet assembly. These black faucet knobs are 2.75 inches long and screw into the lever post just above the bonnet, giving you a way to get a handle on your beer! Make sure you have one of these for each of your faucets so you can pour pints for your friends and family.

Individual 16 gram Co2 non-threaded bulb for use with our Cornelius Keg CO2 Charger (Item # 4990)

Do you have a home draft system and use both a sanke coupler and ball or pin lock kegs? Instead of going through the routine of disconnecting your sanke coupler and reattaching ball or pin lock connections every time, make your life easier with a few of these tailpieces! They have a 1/4" MFL connnection and can be used in conjunction with a hex beer nut and a neoprene washer on both the gas and liquid side of your sanke coupler. Simply replace your existing tailpieces with these, and hook up the respective swivel nuts to your gas and liquid lines.Whenever you want to use sanke or ball/pin lock connections, you can easily attach the swivel nuts to either setup!

Please Note that we recommend using a flare fitting washer on the sanke side to completely seal the metal-on-metal connections (most modern ball and pin lock disconnects have plastic on the end of their connection, so a flare fitting washer is uneccessary unless you have an older style disconnect.) Make life easier for yourself and serve beer through any type of connection!